Plastering Machine
Plastering machine models work with two principles. The first is the Spiral plastering machine, which uses the transfer method called the Worm pump system, where the Spiral and Shaft Set parts are used, and the other is the piston plastering machine, which works with the operation of the arm system connected to two cylindrical pipes.
When choosing a machine, you should decide what features these two principles have and which model will be more efficient for you. The construction area, height and length play a very important role in making a choice.
Contact us to get more detailed information about the plastering machine models we produce. Contact
STP Double Piston Plastering Machine
Insulation plasters, injection mortars, self-leveling screeds, colored plasters, ready-made bag products, binding mortars, insulation mortars, fiber mortars and suspension mortars are pumped in piston plastering machines. There are 3 gears in piston plastering machines. Its speed is adjusted according to the working area. Piston plastering machines are more difficult to use and maintain than helical models. However, they are quite high-level machines in terms of functionality and performance. There are parts that need to be replaced when a certain amount of footage is made.
These are felt set, bearing, seal groups. You also have certain tasks when using piston machines. These are; daily, monthly oil maintenance and grease lubrication of working parts and routine checks will extend the life of the machine under your duty and responsibility. In addition, you can easily perform plastering operations of 20-22-storey buildings with piston models. You can add a maximum of 100-150 meters of hose horizontally.
STP Features
STP Piston black plastering machine is the ideal machine for high-rise buildings and long distances. It is powerful enough to exceed the performance and efficiency of 20-22 storey high rises. In addition, there are 3 gears in piston machines. You can make speed according to your work area. You can make drop casting of set delaying products with piston machines. In addition, there is 24 v electricity in the operator control panel with electrical security system.
ST-8 Worm Pomp Plastering Machine
Worm Pomp plastering machines are highly preferred, easy to use and efficient plastering machines in the construction sector. It is an ideal choice for automating and accelerating plastering operations.
If we need to introduce the working system of spiral machines, the mortar is prepared with the mixer system on it. In addition, it pumps and sprays the mortar until the area where we will apply by applying it to the hose with the spiral and shaft set connected to the pump engine. Spiral plastering machine is generally suitable for plastering operations of low-rise buildings. It is a type of machine suitable for plastering operations of buildings with a maximum of 10-12 floors. You can add a maximum of 60-80 meters of hose.
Worm Pomp ST-8 has parts that need to be changed when a certain amount of footage is made. Such as spiral and shaft set and gun head, etc. 6,000-7000 m2 of work can be done with the spiral and shaft set and gun head. But this rate varies depending on the thickness of the plaster you make and the height of the working area.
Therefore, the helical machine allows plastering work to be done faster and more regularly and provides great savings in manpower. They are especially preferred in large construction projects and regular plastering operations.
It is equipped with a 24 Volt operator control panel, as well as a 100% electrically insulated fiberglass hood, torsion axle system, motor and phase protection systems. You can also get superior performance without experiencing any failures for a long time.
